#Replace deadbolt how to#

Then, set all the pieces aside and place them in a box or container to make reinstallation easier. Locate the two screws that secure the latch mechanisms using your Phillips-head screwdriver. Step 5: Unscrew the LatchĪfter removing the chassis, you can now open your door to unscrew the latch on the edge of the door.

Pull the two halves of the deadbolt apart to remove them. Once unscrewed, gently remove both the chassis inside and outside the door with your two hands. Usually, deadbolt locks come with two screws. Using a Phillips-head screwdriver, uninstall the mounting screws. Step 4: Unscrew the DeadboltĪt this point, removing the deadbolt will be similar to how most deadbolt locks are removed. Once you remove the plate, the mounted screws will be visible. Next, gently pry the base plate off of the chassis. You will need a flat-head screwdriver for this.Įxamine the plate with your fingers and locate a small notch along the rim. Once you have released the turnkey, you can now remove the base plate. Using the awl or a paperclip, apply a little bit of pressure into the hole to release the lever. Next, look for the small hole in the shaft of the thumb-turner. Stand in front of the deadbolt chassis on the inside part of your home. If you don’t know what that is, it is the oval or crescent-shaped knob that lets you lock or unlock the door. The first step involves unlatching the turnkey of your deadbolt lock. Unless you don’t intend to use them again, you certainly don’t want to lose a thing. If you don’t have an awl, a paperclip will do.ĭon’t forget to get a small box or container where you can place the dissembled parts of your deadbolt, including the screws. You will need a Phillips-head screwdriver, a flat-head screwdriver, and an awl that has a sharp edge or point. It’s best to prepare them beforehand so that you can just quickly and conveniently uninstall the deadbolt. To remove a deadbolt from your door, you will need a few tools.

#Replace deadbolt how to#

How To Remove a Deadbolt Lock That Has No Screws: Step-by-Stepīelow are the steps to remove a deadbolt with concealed screws: Step 1: Gather Your Tools If you need to remove a deadbolt from your door but can’t seem to find the mounting screws, there’s a big chance that they are behind the decorative plate. Most deadbolts come with a base plate or “decorative plate,” which covers the mounting screws. However, almost all types are held by two screws on each side of the door. That’s why some basic understanding of how deadbolt locks work is important.ĭeadbolt locks come in different styles and finishes. The only downside of deadbolts with concealed screws is that they are a little challenging to deal with when it’s time to be replaced. That said, if you’re using a deadbolt with “no screws,” you’ve made the right decision. With the screws concealed, it will be difficult and time-consuming for burglars to unlock a deadbolt. Manufacturers purposely do it not only for aesthetics but also as an added security feature. It’s just that some models have metal coverings that conceal the mounting screws. Are There Deadbolt With No Screws?īefore we proceed, you should know one thing: All deadbolts have screws. Read on to learn how to remove a deadbolt lock that has no screws. The real challenge, though, is when your deadbolt doesn’t seem to have screws. The truth is that it’s a straightforward process and requires a few tools you probably already have at home. Unfortunately, some end up hiring a locksmith. When it’s time to replace a deadbolt, many homeowners wish they could remove it all by themselves.